- Changing or upgrading the extruder drive gear can help to increase the speed of your 3D printer.
- Replacing or upgrading the hotend assembly can also help to speed up your printer.
- These are simple procedures that only require a few parts, and they can make a big difference in the printing process.
I was frustrated with how slow my 3D printer was. It was so agonizingly slow that I decided to do a bit of research to see if there was anything could be done to increase the speed. I found that there were quite a few ways to make my 3D printer faster!
One way was to change the extruder drive gear. I found that by doing this, it would allow me to use lower temperatures and still get high-precision prints. Another way was to change or upgrade the extruder drive motor. This would also help with getting higher-quality prints.
I decided to try both of these methods and I was so pleased with the results! Not only did my printer print faster, but the quality of the prints was much better. I would definitely recommend both of these methods to anyone who is looking for ways to make their 3D printer faster.
I did some research and found that I could increase the speed by replacing/upgrading the extruder drive gear and hotend assembly. After making these changes, my printer was able to print much faster!
So, what should you do?
The technology of 3D printing is currently developing at a fast pace so that with each day, there are more new options and more advanced technologies. It is difficult to predict how long the development of 3d printers will last and what will be the most effective in a few decades.
In this article, we show tips on making your 3D printer faster or сhange some parts to speed up the printing process.
Ways to make 3d printers faster
1. Using a simple cooling system
A multi-purpose cooling heat sink, specially designed for water tanks, is made of aluminium and plastic. This will help you better manage your printer’s temperature and keep the printer cooler than before. It allows you to save time on setting up the bed and can be used as a free hand.
The best model for this type of heat sink is Watsontronik’s ultra cooling heat sink. The Price of its ready-made version is about $9-10, which makes it an inexpensive solution for a сooling system.
And this model from Printrbot (3d printer kit) works very well too:
2 . Changing the drive gear
You can change the drive gear if you want to make your 3d printer faster. It is a high-quality part made of hardened steel and with a diameter of 6 mm.
It has a working temperature range of -40 to 120 degrees Celsius and is suitable for all types of plastic. This small but significant change can significantly improve the printing speed.
3 . Changing the extruder drive gear
To increase the print speed, it is necessary to choose an efficient extruder drive gear with a diameter of 2-5 mm, which allows you to use low temperatures and perform high-precision prints.
You can get the best extruder drive gear for a 3d printer from Printrbot (3d printer kit. Price: $20). It has quality hardened steel and should be replaced when the printing speed becomes lower than 400 mm per second. This is the speed at which it is necessary to make the following changes.
4. Modifying the mount of the extruder
Changing the structure of the extruder mount and moving it closer to the print head reduces the printing time by 20%. This modification is not very difficult to perform. It only requires a screwdriver and some experience in working with a 3D printer.
5 . Changing/upgrading extruder drive motor
To make your printer faster, you should change and upgrade the extruder drive motor. It is a high-quality part made of hardened steel, has a working temperature range of -40 to 120 degrees Celsius, and has an optimum resolution of 0.01 mm, allowing you to use low temperatures when printing and high-precision prints.
A comparison of different manufacturers of extruder drive motors will show that it is difficult to choose only one. It is worth paying attention to the model “Kosovo”, as it has a working temperature range of -30 to 260 degrees Celsius and a price of $19.
Another good option is the “Banan” model, which has a working temperature range of -30 to 80 degrees Celsius and costs $15-17.
6 . Changing/upgrading the hot end assembly
The hotend assembly is essential when you want to make your printer faster for two reasons: this part creates too much heat in the printing process and makes it slower. It is worth investing in the best quality hotel assembly.
These assemblies have an extended operating temperature range of -40 to 120 degrees Celsius and an optimal resolution of 0.01 mm, allowing you to use low temperatures when printing and high-precision prints.
Comparing different models of hotends will show that it is difficult to choose only one. It is worth paying attention to the model “J-Head” from Monoprice (3d printer kit price: $20). This model has a working temperature range of -50 to 300 degrees Celsius and a practical flange for easy installation on the 3d printer’s heating block.
Based on the information presented in this article, we can conclude that to increase your 3d printer’s speed, you should replace/upgrade extruder drive gear and hotend assembly. It is a simple procedure requiring only a few parts, which can significantly raise the speed of your printing process.