How to Put 3D Printed Parts Together [Steps]

    3D PrintersHow to Put 3D Printed Parts Together

    Related

    Tips for Painting 3D Prints: A Comprehensive Guide

    Does your 3D print lack smooth, professional-quality finishes? It's...

    An In-Depth Guide to Geometric Dimensioning and Tolerancing

    Are you struggling to understand and apply Geometric Dimensioning...

    Understanding the Factors that Impact Injection Molding Costs

    Struggling to understand the costs associated with injection molding?...

    Exploring the Benefits and Features of the Fuse 1 SLS 3D Printer

    Fuse 1 SLS 3D Printer in a futuristic laboratory."...

    Share

    • There are many ways to put 3D printed parts together, but the easiest way will differ depending on the situation.
    • Glue, screws, and snaps are all common methods of joining 3D printed parts.
    • Each method has its own set of benefits and drawbacks.
    • The best way to put 3D printed parts together will depend on the specific parts and the type of joint that is needed.

    I had never worked with 3D printed parts before, so when I first got a file to print out, I had no idea how to put it together. The pieces were all in different colors, and there were no instructions on how to put them together.

    I tried gluing them together, but it was a mess. The glue would not stick to the plastic, and the parts would not stay together. I also tried inserting screws through the surface of the parts, but that was a disaster because the screws would not go all the way in and ended up coming out.

    I was about to give up and return the printer when I decided to try one last method: snap fitting. I found that if I filed down the edges of the parts a little bit, they would fit together perfectly and snap into place.

    After I figured out how to snap fit the parts together, it was easy to put the rest of the printer together. Now that I know how to do it, assembling my 3D printer is a breeze.

    3D printing is creating a three-dimensional object by laying down thin layers of plastic a material, usually using an additive process.

    To be 3d printed, a file must contain instructions for the printer to make the object. This article will use different joining methods to decide which one you want.

    How to put 3d printed parts together

    1. Glue

    Glue

    The easiest way to put two 3d printed parts together is to glue them together. The glue should be hot enough to be liquid, but not so it bubbles up. It should be spread on both parts’ surfaces and clamped together or pressed together after the glue has cooled a bit.

    2. Insert

    Insert

    The easiest way to put two 3d printed parts together is to cut a hole in both and then insert a threaded screw through the holes to flush with the surface.

    This can be done by placing the screw in a drill stand and then drilling into one of the pieces until it goes through, then doing the same for the other piece. Then when you have each piece drilled, screw them together.

    3. Glue and Screw

    Glue and Screw

    Glue one side of the two 3d printed pieces together, and then screw the other pieces together. This way, you get the benefits of gluing and a screw joint without using two different types of joining methods.

    It should be done in this order: glue the first piece on one side, then screw it onto that first piece to have it glued and screwed simultaneously.

    4. Snap Fitting

    The following way to put two 3d printed parts together is by having them fit together so that they snap together and then stay together on their own. This is done by having the pieces lock together and then doing minor sanding to secure them.

    The benefits of this method are that it can be done very quickly and keeps parts together more securely than just using glue or screws.

    5. Insert Screws

    Insert Screws

    The following way to put two 3d printed parts together is by inserting screws through the surface of both pieces. This method should be done in the same order as everything else.

    6. No Jointing Required

    The following way to put two 3d printed parts together is by using a friction fit, which means just having one or both pieces lock together without any form of the joint through their surfaces.

    This method is slightly more challenging than the previous methods but can still be done faster and with fewer tools than the other methods.

    7. No Jointing Required- 2 Pieces

    This is like No Jointing Required, except it uses two pieces instead of just one. It should be done in the same way as No Jointing Required, except that both pieces need to press together at once or else they will not move past each other.

    8. No Jointing Required- 2 Pieces- 2 Joints

    This is like No Jointing Required, except it uses two pieces, two joints, and two types of jointing (screws and glue). It should be done the same way as No Jointing Required- 2 Pieces.

    FAQs

    Q: What is the best way to put 3D printed parts together?

    A: There is no one-size-fits-all answer to this question. The best way to put 3D printed parts together will depend on the specific parts and the type of joint that is needed. Some common methods of joining 3D printed parts are gluing, screwing, and snapping them together. each of these methods has its own set of benefits and drawbacks.

    Q: What are some ways to join 3D printed parts?

    A: There are many ways to join 3D printed parts, but some of the most common methods are gluing, screwing, and snapping them together. Each of these methods has its own set of benefits and drawbacks.

    Q: How do I know which method of joining 3D printed parts is best for my project?

    A: The best way to put 3D printed parts together will depend on the specific parts and the type of joint that is needed. You should consider the benefits and drawbacks of each method before deciding which one to use.

    Conclusion

    This article has described some ways to put 3d printed parts together. It should be noted that there are many more ways than what was listed and that the easiest way or a way that suits you will differ.

    Rush Chapman
    ( Founder )

    Hello, my name’s Rush Chapman. I’m a 3D printing enthusiast. I started this site to help people choose 3D printing projects and select the best 3D printer for your needs, whether you’re a hobbyist or a pro!